Direct Button Operation; Changing Channels - Sharp Aquos LC-65UB30U User Manual

>>

Direct Button Operation

<<

Changing Channels

You can change channels in several ways.
Method 1
Using CH on the remote control unit or on the TV.
/
Method 2
Press NUMBER. The on-screen keyboard (0-9, • (DOT),
Ent) appears and select the desired channel.
Examples:
To select a 1 or 2-digit channel number (e. g., Channel
5):
Press 5
Ent
To select a 3-digit channel number (e. g., Channel
115):
Press 1
1 5 Ent
To select a 4-digit channel number (e. g., Channel
22.1):
Press 2 • (DOT)
2 1 Ent
Method 3
Selecting the program from the Channel list.
1 Press INPUT on the remote control unit.
The INPUT list displays.
2 Press / to select "AIR" or "CABLE".
The Channel list displays.
3 Press / to select the desired channel, and then press
ENTER.
ENG 3-1
NOTE
When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
When you enter 0-9 only, you have to press Ent to
confirm the channel selection.
When you enter 0-9 and • (DOT), you have to press Ent
to confirm the channel selection.
Complete the above steps within a few seconds.
If you push "0" by itself or you did not press Ent after
you enter 0-9 and • (DOT), nothing will happen.