Direct Button Operation; Changing Channels - Sharp AQUOS XU Series LC-70XU830X Operation Manual

<<
Direct Button Operation
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋﺭﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
Changing Channels
You can change channels in several ways.
Method 1
Using CH / on the remote control unit or
on the TV.
Method 2
Using remote control buttons 0-9.
Examples:
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5
(ENTER)
To select a 3-digit channel number (e. g.,
Channel 115):
Press 1
1 5 (ENTER)
EN 5-1
NOTE
When selecting a 1-digit channel number, it
is not necessary to press 0 before the
number.
When you enter 0-9 only, channel selection
will be made if there is no operation within a
few seconds.
If you push "0" by itself, nothing will
happen.
Complete the above steps within a few
seconds.
When you enter 0-9, channel selection will
be made if there is no operation within a few
seconds.
>>