Table of Contents
Advertisement
Direct Button Operation
Changing Volume
You can change the volume by pressing VOLk/l
on the LCD Monitor or on the remote control unit.
To increase the volume, press VOLk.
•
To decrease the volume, press VOLl.
•
Audio status
Output device
Speaker
Variable sound
•
When "Output Select" is set to "Variable", the indicator
on the screen changes as shown below.
•
See page 31 for details on the Output Select function.
MUTE
Mutes the current sound output.
Press MUTE.
•
"
" will be displayed on the screen for 30 minutes, and
the sound is silenced.
Within 30 minutes of pressing MUTE, mute can be
•
canceled by using one of the methods below.
- Mute will be canceled if you press VOLk/l or MUTE.
•
Mute will be canceled after 30 minutes have passed.
However, the LCD Monitor will not suddenly output a
loud sound as the volume level is set to 0 automatically.
Sleep Timer
Allows you to set a time when the LCD Monitor
automatically switches to standby.
Press SLEEP.
•
The remaining time displays when the sleep timer has
been set.
Each time you press SLEEP, the remaining time
•
switches as shown below.
Off
30
60
90
•
When set, the time automatically starts counting down.
•
If you want to adjust the sleep timer, you can press
SLEEP twice then change the time setting.
•
Five minutes before the time expires, the remaining time
displays every minute.
Select "Off" by pressing SLEEP to cancel the sleep
•
timer.
•
The LCD Monitor will enter standby when the remaining
time reaches zero.
•
When the sleep timer is set, its indicator on the LCD
Monitor lights red.
20
Output Select
Fixed
Variable
Mute
60
120
17
Advertisement
Table of Contents
