Simple Button Operation For Changing Volume/Sound; Sleep Timer; Still Image - Sharp LC-32BD6X Operation Manual

Watching TV
Simple button operation for changing
volume/sound
Changing the volume
You can change the volume on the TV or on the remote
control unit.
• To increase the volume, press
• To decrease the volume, press
NOTE
• "TV", "DTV", "INPUT1", "INPUT2", "INPUT3" and "INPUT4"
modes can store volume adjustment values separately.
Using Mute (e) on the remote control unit
e mutes the current sound output.
1
Press e.
• The sound is silenced.
• "M" has been displayed on the screen for 30
minutes.
k k k k k .
VOL
l l l l l .
VOL
20
Mute
NOTE
• Within 30 minutes after pressing e, press one of the
buttons below to cancel the mute.
—VOLf f f f f /VOLe e e e e
—e
• Mute will be cancelled after 30 minutes. However, the
TV will not suddenly output loud sound as the volume
level will be set to 0 automatically. Increase the volume
level by pressing VOLk.
2
Press e again within 30 minutes to cancel
the mute.
• Before 30 minutes, the volume level returns to
the previous setting.

Sleep timer

Allows you to set a time when the TV automatically
switches to standby.
1
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remain 2 hr. 00 min.
2
Each time you press SLEEP, the remaining
time switches as shown below.
0 hr. 30 min.
Off
2 hr. 30 min.
NOTE
• The sleep timer indicator on the TV lights up when the
time has been set.
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select "Off" by pressing SLEEP to cancel the sleep timer.

Still image

You can freeze a motion picture on the screen.
1
Press FREEZE.
2
Press FREEZE. again to exit still image.
NOTE
• The still image automatically goes out after 30 minutes.
• When you freeze the picture, an icon is displayed at the
lower left corner of the screen.
1 hr. 00 min. 1 hr. 30 min.
2 hr. 00 min.
15