Figure 3-19: Bluetooth Configuration - Client Applications Tab; Figure 3-20: Client Applications Properties - Linksys USBBT100 User Manual

Bluetooth USB Adapter
The Client Applications tab.
From this tab, you can select which services the Adapter will access from other Bluetooth devices.
The Add COM port button allows you to connect one Bluetooth USB Adapter on a PC to another Bluetooth USB
Adapter on a PC through a serial connection. If you wish to break this connection, click the Delete COM port
button.
These services can be configured for security and other options by double-clicking the service or selecting the
service and clicking the Properties button. The screen that appears will show you all the options you can
configure for that service. This screen is different for each service. The one shown below is for PIM
Synchronization.
Then, click the Cancel button if you wish to leave the Wizard without saving your changes, the Apply button to
save the settings, leaving the Bluetooth Configuration screen open, or the OK button to save these settings and
close the Bluetooth Configuration screen. You can also press the Help button for more information.
For information on Applications and Services, see Appendix B: Bluetooth Applications and Services.

Figure 3-19: Bluetooth Configuration - Client Applications tab

Figure 3-20: Client Applications Properties

Chapter 3: Using the Bluetooth USB Adapter 17
Advanced Cofiguration