Figure 3-16: Bluetooth Configuration - Discovery Tab - Linksys USBBT100 User Manual

Bluetooth USB Adapter
The Discovery tab.
From this tab, you can specify the types of Bluetooth devices the Adapter will access.
The Adapter automatically searches for new Bluetooth devices every ten minutes. You can select how often the
Adapter will discover new Bluetooth devices by clicking the box beside Look for other Bluetooth devices and
filling in how often this search will be done.
If you want all Bluetooth devices to be reported, select Report all Bluetooth devices from the pull-down menu.
If you want to limit those Bluetooth devices that the Adapter reports, select Report only selected Bluetooth
devices from the pull-down menu. Then, in the box below that, you can add Bluetooth devices (by clicking the
Add Device button) or delete Bluetooth devices (by clicking the Delete button) that will be reported.
Then, click the Cancel button if you wish to leave the Wizard without saving your changes, the Apply button to
save the settings, leaving the Bluetooth Configuration screen open, or the OK button to save these settings and
close the Bluetooth Configuration screen. You can also press the Help button for more information.

Figure 3-16: Bluetooth Configuration - Discovery tab

Chapter 3: Using the Bluetooth USB Adapter 15
Advanced Cofiguration