Makita DHR164 Instruction Manual
Cordless rotary hammer
Hide thumbs
Also See for DHR164:
- Instruction manual (73 pages) ,
- Technical information (17 pages) ,
- Instruction manual (65 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita DHR164
Summary of Contents for Makita DHR164
- Page 1 INSTRUCTION MANUAL Cordless Rotary Hammer DHR164 DHR165 015178 IMPORTANT: Read Before Using.
-
Page 2: Specifications
• Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications and battery cartridge may differ from country to country. • Weight, with battery cartridge, according to EPTA-Procedure 01/2003 END004-6 Model DHR164 Symbols The following show the symbols used for the equipment. Sound pressure level (L ) : 85 dB (A) Be sure that you understand their meaning before use. -
Page 3: General Power Tool Safety Warnings
EC Declaration of Conformity Keep children and bystanders away while operating a power tool. Distractions can cause Makita declares that the following Machine(s): you to lose control. Designation of Machine: Electrical safety Cordless Rotary Hammer Power tool plugs must match the outlet. -
Page 4: Cordless Rotary Hammer Safety Warnings
Do not use a power tool while you are tired or and any other condition that may affect the under the influence of drugs, alcohol or power tool’s operation. If damaged, have the medication. A moment of inattention while power tool repaired before... - Page 5 ENC007-8 hidden wiring. Cutting accessory contacting a "live" wire may make exposed metal parts of the IMPORTANT SAFETY power tool "live" and could give the operator an INSTRUCTIONS electric shock. Wear a hard hat (safety helmet), safety FOR BATTERY CARTRIDGE glasses and/or face shield.
-
Page 6: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION (Lithium-ion battery with star marking) CAUTION: 1. Star marking Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1. -
Page 7: Torque Limiter
Lighting up the lamp Selecting the action mode Rotation with hammering 1. Switch trigger 2. Lamp 1. Lock button 2. Rotation with hammering 3. Action mode changing knob 015181 CAUTION: 007378 For drilling in concrete, masonry, etc., depress the lock Do not look in the light or see the source of light •... - Page 8 If the bit cannot be pushed in, remove the bit. Pull the ASSEMBLY chuck cover down a couple of times. Then insert the bit again. Turn the bit and push it in until it engages. After installing, always make sure that the bit is securely CAUTION: held in place by trying to pull it out.
-
Page 9: Operation
Blow-out bulb (optional accessory) Bit diameter Dust cup 5 6 mm - 14.5 mm 1. Blow-out bulb Dust cup 9 12 mm - 16 mm 006406 OPERATION Hammer drilling operation 002449 After drilling the hole, use the blow-out bulb to clean the dust out of the hole. -
Page 10: Maintenance
Replacing carbon brushes attachment for its stated purpose. If you need any assistance for more details regarding 1. Limit mark these accessories, ask your local Makita Service Center. SDS-Plus Carbide-tipped bits • Drill chuck assembly • Drill chuck S13 •... - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885381-227...