Makita DHR164 Instruction Manual
Cordless rotary hammer
Hide thumbs
Also See for DHR164:
- Instruction manual (73 pages) ,
- Technical information (17 pages) ,
- Instruction manual (33 pages)
Related Manuals for Makita DHR164
Summary of Contents for Makita DHR164
- Page 1 INSTRUCTION MANUAL Cordless Rotary Hammer DHR164 DHR165 015178 IMPORTANT: Read Before Using.
-
Page 2: Specifications
• Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications and battery cartridge may differ from country to country. • Weight, with battery cartridge, according to EPTA-Procedure 01/2003 END004-6 Model DHR164 Symbols The following show the symbols used for the equipment. Sound pressure level (L ) : 85 dB (A) Be sure that you understand their meaning before use. -
Page 3: Ec Declaration Of Conformity
Power tool plugs must match the outlet. Never EC Declaration of Conformity modify the plug in any way. Do not use any Makita declares that the following Machine(s): adapter plugs with earthed (grounded) power Designation of Machine: tools. Unmodified plugs and matching outlets will Cordless Rotary Hammer reduce risk of electric shock. -
Page 4: Cordless Rotary Hammer Safety Warnings
A moment of inattention while operating power 22. Keep cutting tools sharp and clean. Properly tools may result in serious personal injury. maintained cutting tools with sharp cutting edges Use personal protective equipment. Always are less likely to bind and are easier to control. wear eye protection. - Page 5 ENC007-9 Wear a hard hat (safety helmet), safety glasses and/or face shield. Ordinary eye or IMPORTANT SAFETY sun glasses are NOT safety glasses. It is also INSTRUCTIONS highly recommended that you wear a dust mask and thickly padded gloves. FOR BATTERY CARTRIDGE Be sure the bit is secured in place before operation.
-
Page 6: Functional Description
Lithium-ion batteries with a star marking are equipped FUNCTIONAL DESCRIPTION with a protection system. This system automatically cuts off power to the tool to extend battery life. The tool will automatically stop during operation if the tool CAUTION: and/or battery are placed under one of the following conditions: Always be sure that the tool is switched off and the •... - Page 7 Reversing switch action NOTE: Depending on the conditions of use and the • 1. Reversing ambient temperature, the indication may differ switch lever slightly from the actual capacity. Switch action 1. Switch trigger 015182 This tool has a reversing switch to change the direction of rotation.
- Page 8 CAUTION: 1. Bit shank Do not rotate the action mode changing knob • 2. Bit grease when the tool is running. The tool will be damaged. To avoid rapid wear on the mode change • mechanism, be sure that the action mode changing knob is always positively located in one of the action mode positions.
-
Page 9: Operation
by both side grip and switch handle during NOTE: operations. Failure to do so may result in the loss The depth gauge cannot be used at the position where • of control of the tool and potentially severe injury. the depth gauge strikes against the gear housing. NOTE: Dust cup (optional accessory) Eccentricity in the bit rotation may occur while operating the... -
Page 10: Maintenance
Only use accessory or attachment for its stated purpose. 1. Limit mark If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. SDS-Plus Carbide-tipped bits • Drill chuck assembly • Drill chuck S13 •... - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885381B227...