Maintenance; Replacing Saw Blade; Ec Declaration Of Conformity - Makita LC1230 Instruction Manual

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.

Replacing saw blade

Continuing to use a dull and worn blade may cause
motor overload and decreased cutting efficiency.
Replace with a new blade as soon as it is no longer
effective.
Replacement of carbon brushes (Fig. 15 & 16)
Replace carbon brushes when they are worn down to
the limit mark. Both identical carbon brushes should
be replaced at the same time.
To maintain product safety and reliability, repairs,
maintenance or adjustment should be carried out by
a Makita Authorized Service Center.
10
Noise and Vibration of Model LC1230
The typical A-weighted noise levels are
sound pressure level: 98 dB (A)
sound power level:
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
EC-DECLARATION OF CONFORMITY
The undersigned, Yasuhiko Kanzaki, authorized
by Makita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo,
Aichi 446-8502 Japan declares that this product
(Serial No. : series production)
manufactured by Makita Corporation in P.R.C
is in compliance with the following standards or stan-
dardized documents,
EN61029, EN55014, EN61000
in accordance with Council Directives, 73/23/EEC,
89/336/EEC and 98/37/EC.
Yasuhiko Kanzaki
MAKITA INTERNATIONAL EUROPE LTD
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
111 dB (A)
2
.
CE99
Director
.