Specifications - Makita BHP440 Instruction Manual

ENGLISH
1. Battery cartridge
2. Button
3. Red part
4. Switch trigger
5. Lamp
6. Reversing switch lever
7. Speed change lever
8. Adjusting ring

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute (min
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the tool. Be sure
that you understand their meaning before use.
Only for EU countries
Do not dispose of electric equipment together with house-
hold waste material!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric equip-
ment that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
4
Explanation of general view
9. Action mode changing ring
10. Arrow
11. Graduations
12. Sleeve
13. Screw
14. Hook
15. Groove
16. Blow-out bulb
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
-1
)
Low (1)
High (2)
-1
)
Low (1)
Overall length
Net weight
Rated voltage
17. Limit mark
18. Rear cover
19. Screws
20. Spring
21. Arm
22. Recesed part
23. Carbon brush cap
24. Hole
BHP440
ø 6.8 mm x 50 mm
0 - 21,000
1.7 kg
D.C. 14.4 V
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
BHP450
13 mm
13 mm
27 mm
M6
0 - 1,400
0 - 400
0 - 6,000
204 mm
1.8 kg
D.C. 18 V