Connect / Disconnect Battery; Connect Battery; Disconnect Battery - Honeywell HX2 User Manual

Microsoft windows ce 5 operating system
Hide thumbs Also See for HX2:
Table of Contents

Advertisement

Connect / Disconnect Battery

Note:
The HX2 will not function unless a battery is securely tethered. When the HX2 is placed in a powered
cradle, the connection between the tethered battery and the HX2 is broken, and the HX2 is receiving
power through the cradle-HX2 connector.
Be sure to place the unit in Suspend Mode before removing the battery. Failing to properly place the device in Suspend mode
will result in a loss of all unsaved data.
An HX2 will retain data, while the main battery is removed and replaced with a fully charged main battery, for 5 minutes.
Important: When the internal battery power is Low or Very Low connect the AC adapter to the HX2 before replacing the main
battery.
Note:
The battery should not be replaced in a dirty, harsh or hazardous environment. When the battery is
not connected to the HX2, any dust or moisture that enters the battery well or connector may transfer
to the battery/well terminals, potentially causing damage.
Warning : Only use Honeywell HX2A301BATTSTD / 160289-0001 or HX2A302BATTEXT / 160320-0001 batteries as
replacements.

Connect Battery

To connect the main battery, complete the following steps:
1. Hold the battery with one hand with the connector facing up.
2. With the other hand, press the battery cable connector down onto the battery connector, making sure the connectors
line up.
The HX2 draws power from the battery immediately upon successful connection.
Check battery status by tapping the Start | Settings | Control Panel | Battery icon. Main battery level, internal battery level,
status and other details are displayed.

Disconnect Battery

To remove the battery cable from the HX2, first press downward on the Retaining Clip, then pinch and pull the cable connector
straight up and away from the HX2. Do not use a metal object, or extreme force, to remove the cable connector from the HX2.
Re-connect cables and reassemble the HX2 body-worn components.
Place the discharged battery pack in a powered battery charger.
2-13

Advertisement

Table of Contents
loading

Table of Contents