Status Leds; System Status Led; Alpha Mode Status Led; Bluetooth Status Led - Honeywell HX2 User Manual

Status LEDs

LEDs (Light Emitting Diodes) are located on the front of the HX2. They are:
1. System Status LED indicates power management status.
2. Alpha Mode Status LED applies to the Alpha Mode 3 tap keypad only.
3. Bluetooth Status LED applies to Bluetooth client functions.

System Status LED

Blinking Red
Steady Red
Blinking Green
Off

Alpha mode Status LED

Steady Amber when alpha mode enabled.
l

Bluetooth Status LED

Blinking Slowly
Blinking Medium
Blinking Fast
Off
Main battery power fail; critical suspend mode
Main battery low. If the main battery is not replaced with a fully charged battery before the internal
battery fails, the HX2 is turned Off.
Display turned off.
HX2 is Off (both batteries depleted) or the HX2 is in Suspend mode
Bluetooth is paired but not connected to a device.
Bluetooth is paired and connected to a device.
Bluetooth is discovering Bluetooth devices.
Bluetooth hardware has been turned off or it does not exist in the HX2.
1-11