Status Leds; System Status Led; Bluetooth Status Led; Wireless Activity - Honeywell HX3 User Manual

Status LEDs

LEDs (Light Emitting Diodes) are located on the front of the HX3. They are:
1. System Status LED indicates power management status.
2. Wireless Activity LED.
3. Bluetooth Status LED applies to Bluetooth client functions.

System Status LED

Blinking Red
Steady Red
Blinking Green
Steady Green
Off

Bluetooth Status LED

Blinking Slowly
Blinking Medium
Blinking Fast
Off

Wireless Activity

Flickering Amber
Steady Amber
Off
2-6
Main battery power fail; critical suspend mode
Main battery low. If the main battery is not replaced with a fully charged battery before the internal bat-
tery fails, the HX3 is turned Off.
The HX3 is On and attached to either a battery with a good charge or to an external power source.
The HX3 is booting up.
HX3 is Off (both batteries depleted) or the HX3 is in Suspend mode
Bluetooth is paired but not connected to a device.
Bluetooth is paired and connected to a device.
Bluetooth is discovering Bluetooth devices.
Bluetooth hardware has been turned off or it does not exist in the HX3.
HX3 is booting up.
The HX3 is connected to a wireless network.
The HX3 has not connected to a wireless network.