Table of Contents
Advertisement
1. Seat the cable connector firmly over the pins and turn the thumbscrews in a clockwise direction. Do not overtighten.
2. If a USB port is present, plug the desired device, such as a USB mouse or storage device, into the USB port. Refer to
the Windows help system and the documentation for your USB device for more information. USB devices may be
installed, removed or swapped without turning off the Thor VX8.
3. If a COM4 port is present, seat the serial device cable connector firmly over the pins and turn the thumbscrews in a
clockwise direction. Do not overtighten.
Securing Port Lid
The screws used for the port lid should be alternately tightened to provide proper dust and moist protection (IP65 requirement).
There are eight (8) Torx 20 screws securing the port lid.
Fasten the cable tube in the vehicle, without putting strain on the tube. Now the Thor VX8 is ready to be mounted in the vehicle.
3-15
Advertisement
Table of Contents
