Connect Usb Devices; Connect Ethernet Cable - Honeywell Thor VX8 User Manual

Vehicle-mount computer

Hide thumbs Also See for Thor VX8:

Table of Contents

Connect USB Devices

The Thor VX8 provides the following Type A ports:

internal USB port, accessible when the service lid is removed

two external USB ports (see below)

a USB port via a

dongle cable attached to the multipurpose

Plug the desired device, such as a USB mouse or storage device, into the USB port. Refer to Start > Help and Support and

the documentation for your USB device for more information.

USB devices may be installed, removed or swapped without turning off the Thor VX8.

Note:

Use of a shielded cable is required to maintain emissions and susceptibility compliance..

1. Insert the network cable and ensure it is firmly seated in the connector jack.

2. To remove the Ethernet cable, press the release tab on the cable end.

3-4

port.

Table of Contents