Chapter 1: Introduction; About This Guide - Honeywell HX3 User Manual

Chapter 1: Introduction

The HX3 is a small, lightweight wearable voice computer. The HX3 is designed for use with voice applications while the user's
hands are actively engaged with the physical environment, including piece picking to carts, containers or conveyers; case
picking; parcel moves; and broken case activities.
The HX3 can be docked in the HX2 Cradle. The HX3 batteries can be re-charged while the HX3 is in the cradle. The batteries
are also re-charged in the HX2 Battery Charger. When the HX3 is docked in a powered cradle, connection is broken between
the tethered battery and the HX3. The HX3 begins receiving power through the powered cradle connector. It may be necessary
to wake the HX3 from Suspend when it is inserted in the cradle.
Before you begin:
1. ActiveSync must be installed on a desktop/laptop PC with a USB port.
2. Connect the HX3 via a USB-Client cable to the PC.
3. Copy LXEConnect setup files from the HX3 to the PC.
4. Install and launch LXEConnect on the PC.
When HX3 configuration is complete, exit LXEConnect and disconnect the ActiveSync connection.

About this Guide

This HX3 User's Guide provides instruction for the end-user or system administrator to follow when setting up a new HX3.
This user's guide has been developed for a HX3 with a Microsoft® Windows® CE 5 operating system.
1-1