Honeywell Domonial User Manual page 16

Understanding detectors operation
⑥
4
1
Pir detector
A PIR DETECTO R is a motion detector, which reacts to the temperature fluctua-
tions caused by a person in motion
If the detector's light indicator is setup, it will flash when movement is detected. In
order to save the batteries of the wireless detectors, the next detection will be delayed
for a few minutes. So the indicator will flash again only after a few minutes of rest.
2
Door-contact
A DOOR CONTA C T is a magnetic contact, which two parts are fitted one on a door
frame and the other on the door itself.
When the door, or window, is open, the detector is triggered.
Before leaving the premises, always make sure that all openings are properly closed.
When arming your security system, triggering of a detector will be indicated if one
or more contacts outside the exit route are not secured.
3
Glass break detector
A GLASS BREAK DETECTOR analyses the various frequencies emitted by glass
being broken.
Smoke detector
4
A SMOKE DETECTOR mounted on the ceiling ensures the coverage of about 50
square metres. Refrain from smoking in the vicinity of this detector.
1
16
3
2