Casio QT-6600 Programming Manual page 9

Enter terminal ID and IP address
• Case 1: If your system has no LAN device = "0"
• Case 2: Terminal ID = "1"
• Case 3: Terminal ID = "2" ~ "32"
QT-6600 Programming Manual
——— Terminal ID: 0, 1 ~ 32
——— Press <YES> to continue.
——— Press <YES> to continue.
——— Enter IP address if you want to change.
——— Select "CLIENT", if you want to use this terminal as a DHCP client.
——— Select <YES>, if you want to use this terminal as an FTP server.
——— Press <YES> to continue.
* The IP address of each terminal should be the unique number from 192.168. 0. 1 to
192.168.255.255. (Do not change the default value, if you don't have enough knowledge
about IP address.)
——— Select "MANUAL", if you want to enter IP address
——— Press <YES> to continue.
* Do not select "IP ADDRESS MANUAL", if you don't have enough knowledge about
IP address.
Select <NO>, if you want to use this terminal as a client.
manually.* (IP address setting line will appear on the
screen.)
P-9