Programming Department Descriptors; Programming Plu/Subdepartment/Department Descriptors By Range; Copying Plu Descriptors To Plu 2Nd; Programming Function Key Descriptors - Casio QT-6600 Programming Manual

Program 2
5-2-4

Programming department descriptors

Operation: <PGM2> → 1.Item Descriptor → 4.Department → Select item
5-2-5

Programming PLU/subdepartment/department descriptors by range

Operation: <PGM2> → 1.Item Descriptor → 5.Range
→ Select job (PLU / PLU 2nd@ / Subdepartment / Department)
5-2-6

Copying PLU descriptors to PLU 2nd

Operation: <PGM2> → 1.Item Descriptor → 6.PLU -> 2nd@ Copy
5-2-7

Programming function key descriptors

Operation: <PGM2> → 1.Item Descriptor → 7.Char & Press Key
→ Enter descriptor → Press the appropriate key on the keyboard
P-130
——— 0 ~ 16 characters
When you press the <Yes> key, the character programming
keyboard (refer to the page P-126) is opened.
a. You can enter the character programmed to the depart-
ment file (character on receipt).
b. If the item is linked to the keyboard or a list, the character
(actual keytop character and keytop character in a list
window) can be set after step-a.
——— 0 ~ 24 characters (0 ~ 16 for Subdept. and Dept.)
——— Start range ("0" means the first record.)
——— End range ("0"means the last record.)
——— Start range ("0" means the first record.)
——— End range ("0"means the last record.)