Programming I/O Parameter - Casio QT-6600 Programming Manual

4-1-12 Programming I/O parameter

Operation: <PGM3> → 1.Machine Feature → 12.I/O Parameter
Worksheet for I/O parameter program
First record (Inline)
TCP/IP port group number: Group 1 = 0/1, Group 2 = 2
(Choose Group2 if conflicting with auxiliary inline device)
Always "0"
Second record (Online)
Online baud rate: 115200bps = 0,1
38400bps = 3,
4800bps = 6,
Activation signal (trigger):
DR = 0, CI = 1
Third record (not used)
Always "0"
Fourth record (Printer 1)
Using TM-J7100 as a slip printer:
Yes = 1, No = 0
Using RS-232C port for printer:
COM4 = 4, COM5 = 5, COM6 = 6 (0, 1 ~ 3, 7 ~ 9: no connection)
Baud rate of the RS-232C port for printer:
19200bps = 0, 9600bps = 1
Using printer connected to RS-232C port: No printer = 99
• TM-U88-IV = 00
• UP-400 = 10
QT-6600 Programming Manual
——— Parameter (refer the worksheet below)
Description
Description
57600bps = 2,
19200bps = 4, 9600bps = 5,
2400bps = 7
Description
Description
• UP-360 = 03
• TM-J7100 = 12
Note: Please perform the flag clear opera-
tion of the terminal after changing the
I/O parameter table.
Note: Besides flag clear, please turn off and on
the printer.
• TM-U220 = 02
Choice Program code
:
Significant
number
;
Significant
number
Choice Program code
:
Significant
number
D
:
Significant
number
D
Choice Program code
;
Choice Program code
:
Significant
number
D
:
Significant
number
D
:
Significant
number
D
: :
Significant
numbers
D
2
D
2
D
1
2
1
D
1
5
4
3
D
1
P-55