Canon imageFORMULA P-215II User Manual page 67

enabled when CaptureOnTouch is running (or resident in the system).
When this setting is enabled, the [Do not display the main screen when
the scan is started with the scanner button] setting is disabled.
If the [Do not display the main screen when the scan is started with the
scanner button] check box is selected, the main screen of
CaptureOnTouch is not displayed when the Scanning Shortcut scanning is
started by pressing the scanner's Start button. However, dialogs and error
messages during scanning and the pop-up screen when the scan is
completed will be displayed.
When this setting is enabled, the [Enable additional scan] and [Edit after
scanning] check boxes on the Edit Scanning Shortcut settings screen are
disabled.
Back Up / Restore
Use the [Back Up] and [Restore] buttons to back up the configuration file
(settings, registered jobs, etc.) of CaptureOnTouch and restore the
settings from the backup data.
[Back Up] button
Back up the settings of CaptureOnTouch to a backup file (*.cot). You can
store the initial settings of CaptureOnTouch by performing a backup before
you first use CaptureOnTouch.
[Restore] button
Restore the settings from the backup file.
When using multiple computers, you can back up the environmental
settings of one computer and then perform a restore on the other
computers so that all of the computers have the same settings.
Downloaded from ManualsPrinter.com Manuals
[Plugin] Tab
On the [Plugin] tab, confirm the plugins that have been added to
CaptureOnTouch.
[Setting] button
Displays the detailed information on the selected plugins.
This button may not be displayed for some plugins.
[Enable] [Disable] button
This button is used to toggle between Enable/Disable modes for the plugin
selected from the plugin list.
If you click the [Disable] button, the following dialog is displayed.
66