Canon imageFORMULA P-215II User Manual page 49


The interval between the time you press the Start button on the
scanner and the time scanning begins is shortened when the
[Make CaptureOnTouch resident] check box is selected in the
[Basic settings] tab of the [Environmental settings] dialog box.
For details, see Environmental Settings65.
Exiting CaptureOnTouch
To close the CaptureOnTouch window, click
This closes the window, but CaptureOnTouch will continue to reside in the
system.
To quit the CaptureOnTouch application, click
in the taskbar, and select [Exit] from the menu.
CaptureOnTouch becomes no longer resident in the system and the icon
disappears from the taskbar.
Downloaded from ManualsPrinter.com Manuals
To close the CaptureOnTouch window, click
This closes the window, but CaptureOnTouch will continue to reside in the
system.
click
menu.
at the top of the window.
Restarting CaptureOnTouch
To use CaptureOnTouch after it has been made not resident in the system,
use one of the following procedures to restart it. CaptureOnTouch will start
(CaptureOnTouch icon)
and become resident in the system again.


48
(CaptureOnTouch icon) in the menu bar, and select [Exit] from the
Click [Start] - [All Programs] - [Canon P-xxxx] - [P-xxxx
CaptureOnTouch].
Press the Start button on the scanner (in this case, the main screen
of CaptureOnTouch will open and scanning will start using the scan
method assigned to the Start button).
at the top of the window.