Setting The Long Document Mode - Canon imageFORMULA P-215II User Manual

Setting the Long Document Mode

Setting the Long Document ModeThe length of documents that can be
scanned with the scanner is normally 356 mm (14"), but you can
scan documents up to 1,000 mm (39.4") long by setting the scanner
to the Long Document mode.
By selecting the Long Document mode and setting the [Page Size] on the
scanner driver settings screen to auto-detection, documents of up to
1,000 mm (39.4") in length can be scanned. Note the following when using
the Long Document mode:
●
When scanning long documents, close the feed extension
plates.
●
When scanning in the Long Document mode, if the document is
placed on the scanner in a skewed position, it may hit the edges
of the feeding area and be damaged. Be careful to place the
document so that it is not skewed.
●
When scanning with the Long Document mode, paper jam
detection may react slowly, resulting in damage to the
document. Be careful to avoid paper jams.
●
When scanning long documents, make sure to scan the
documents one at a time.
●
When scanning large-sized documents with the Long Document
mode, scanning may be slower. Errors may also occur due to
memory shortage and scanning may be disabled.
Downloaded from ManualsPrinter.com Manuals
1
Log on to Windows as an Administrator.
2
Click the Start button, and then click [All Programs], [Canon P-xxx],
and [Canon imageFORMULA Utility].
imageFORMULA Utility starts.
In Windows 8.1 / 8, it is registered in the following location.
3
Click [CANON P-xxx USB] and click [Properties].
Click the [Maintenance] tab, and then select a Long Document mode.
Select [Long Document mode (1,000 mm)].
31