Canon imageFORMULA P-215II User Manual page 62

[Dots per inch]
Select the resolution.
Select [Detect automatically] and the software will automatically scan the
document at the optimum resolution.
[Scanning Side]
Select the scanning side of the document.
If you select [Skip blank page], scanned images of blank pages are not
saved.
[Automatically straightens skewed images]
If a document is not straight when fed, the scanner detects that the
document is not straight from the scanned image and straightens the
skewed image.
Select the setting from below.
[OFF]
[Straightens with angle of fed documents]
[Straightens with angle contents of fed documents]
[Rotate image to match orientation of text]
Check [Enable] on to rotate the image in the same direction with the
characters.
[Use advanced settings dialog box]
Document scan settings include basic items that are configured in [Scan
settings], and the settings that are configured in the advanced settings
dialog box. The settings in the advanced settings dialog box are applied
for settings other than the basic items.
Enable [Use advanced settings dialog box] to implement advanced
scanner settings other than the basic items using the advanced settings
dialog box (scanner driver). To open the scanner driver, enable this item,
and then click the [Settings] button.
Downloaded from ManualsPrinter.com Manuals
The driver settings dialog box includes setting items that are the
same as the basic items in [Scanner setting], but the setting for
each of the them is stored separately.
Which settings are used during scanning differs as follows
depending on the setting of the [Use advanced settings dialog box]
check box.
Setting of [Use advanced
settings dialog box]
OFF
ON
For the advanced settings other than the basic items, see the help in
the driver settings dialog box.
General
Set the following items as occasion demands.
Name
Enter the name to be displayed in the select document panel.
Icon
You can change the document scan icon displayed in the select document
panel and scanning shortcut panel.
Enable [Change icon] to enable the [Settings] button and select the file.
The file formats that can be selected as icon files are described below.
61
Basic items Other than basic
items
Settings of Settings of the
[Scanner setting] advanced settings
dialog box of the
scanner driver
Settings of the advanced settings dialog
box of the scanner driver