Recording An Answer Only Announcement; Remote Access Code - GE 28871 User Manual

Recording an Answer Only Announcement

Make sure the Announce Only is set to ON. For best results when recording,
you should be about nine inches from the microphone, and eliminate as much
background noise as possible.
1. Press the ans. menu button repeatedly until the system announces
"Announcement Two" The message indicator displays A2.
4
| skip or|
. Press the
Begin speaking after the beep.
NOTE: Maximum recording time is 60 seconds, announcement must
be at least 3 seconds in length.
. Press the g stop button when finished. Your recording will be played
automatically. If you're not satisfied, record your announcement again.
Reviewing/Deleting A1/A2 Announcements
1. Press the ans. menu button repeatedly until the system announces
"Announcement One" or "Announcement Two"
4
play button to review the latest recorded announcement).
. Press the
. While announcement is playing, press the delete button to delete the current
announcement. The answering system will use the default announcement.
NOTE: The default announcement cannot be deleted.

Remote Access Code

You can access the answering system from a tone-dial telephone in another (remote)
location. The code is required for remote access, and it prevents unauthorized access
to your answering system. The code can be any 4-digit number, from 0000 to 9999.
1. Press the ans. menu button repeatedly until the system announces "Remote
access code is..." and the message indicator displays Ac.
4
| skip or|
. Press the
ans. menu button to confirm.
. Repeat Step  until all 4 digits have been set. The system announces the new
code.( The default code is 0000.)
3
repeat button. The system announces "Now Recording".
3
repeat button to set the first digit between 0-9. Press the
9