Fujitsu ETERNUS DX60 S3 User Manual page 685

Appendix A Parameter List
A.1 System Management
●
Extreme Cache Memory Size Settings (when "Extreme Cache Pool" is selected)
• Encryption by CM
Description
Input condition/
Display contents
•
If encrypted volumes are included in the volumes that are controllable for the relevant CM, encrypt the EXCP
area. If the EXCP area is not encrypted, this area cannot be used as the second cache memory for the I/O to the
encrypted volume.
•
If no volumes are encrypted in the volumes that are controllable for the relevant CM, encrypting the EXCP area
is not required.
●
Select Drives ([Tabular] Tab)
• Checkbox to select drives
Description
Input condition/
Display contents
Select the encryption status of the EXCP area.
"Off" is displayed when the memory size is "0GB". This item is available only when the
encryption mode is enabled.
•
On
Create an encrypted EXCP area.
•
Off
Create an unencrypted EXCP area.
Select checkboxes for the SSDs in RAID groups that configure EXCPs.
Checkbox
•
Selected
•
Cleared
685
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0