Chapter 3 Volume Management
3.19 Snapshot Management for NAS Volumes
3.19.3
Start Snapshot
This function restarts the Snapshot acquisition.
This function is displayed in a Unified Storage environment.
To acquire the Snapshot again after deleting the Snapshot settings, registration of the Snapshot
configuration information is required. Refer to
The procedure to restart the Snapshot acquisition is as follows:
Procedure
1
Select which NAS user volumes to start Snapshot for (multiple selections can be made) and
click [Start Snapshot] in [Action].
A confirmation screen appears.
2
Click the [OK] button.
The Snapshot starts.
3
Click the [Done] button to return to the [Snapshot] screen.
"3.19.1 Set Snapshot" (page 327)
333
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details.
End of procedure
P2X0-1270-13ENZ0