Fujitsu ETERNUS DX60 S3 User Manual page 354

Chapter 4 Connectivity Management
4.1 Host Affinity Management
5
Select a CA port group to configure a host affinity, and click the [OK] button.
 The display returns to the initial screen.
• If a specific host group has been selected in the "Host Group" field, CA port groups with any of the
following conditions are not displayed:
-
-
• If "All" has been selected in the "Host Group" field, CA port groups with any of the following
conditions are not displayed:
-
-
The affinity mode is "OFF"
The CA port group is used by another host affinity
The CA port group is used by another host affinity
Member CA ports that used in other CA port groups
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
354
P2X0-1270-13ENZ0