A.5.3 Change Controlling Cm - Fujitsu ETERNUS DX60 S3 User Manual

Appendix A Parameter List
A.5 RAID Group Management
A.5.3 Change Controlling CM
For details about this function, refer to
For the factory default settings for this function, refer to
●
Change Controlling CM Setting
• New Controlling CM
Description
Input condition/
Display contents
A.5.4 Expand RAID Group
For details about this function, refer to
For the factory default settings for this function, refer to
●
Manual Setting
• RAID Level after expand
Description
Input condition/
Display contents
●
Drive Selection ([Tabular] tab)
• Checkbox to select drives
Description
Input condition/
Display contents
"5.4 Change Controlling CM" (page
Select the new Controlling CM.
""Automatic" and the normal CM number ("CE#x CM#y" or "CM#y") that is installed are
displayed (x: CE number, y: CM number).
Select "Automatic" for normal operations. When "Automatic" is selected, the Controlling
CM that is to be allocated is determined by the RAID group number. Refer to
Controlling CM setting" (page 910)
•
For the ETERNUS DX8700 S3/DX8900 S3
-
Automatic
-
CE#x CM#y
•
For the other models
-
Automatic
-
CM#y
"5.5 Expand RAID Group" (page
Select the RAID level after expansion is performed.
•
High Performance (RAID1+0)
•
High Capacity (RAID5)
•
High Reliability (RAID6)
•
Striping (RAID0)
Select the checkbox for the drive that is to be used after expansion.
The checkbox for the drive being used in the selected RAID group is selected.
Clear the checkbox for the drive that is not used after expansion.
When selecting drives, refer to
Checkbox
•
Selected
•
Cleared
915
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
538).
"Appendix B Change Controlling CM" (page
for details.
540).
"Appendix B Expand RAID Group" (page
"Delete RAID Group" (page 535).
1004).
"Automatic
1005).
P2X0-1270-13ENZ0