Shock Absorber Spring Preload Adjustment - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
The standard length of the preloaded spring is
as follows:
TC - TXC: A= 250 ± 0.5 mm (9.84 ± 0.02 in.)
TE: A= 247 ± 0.5 mm (9.72 ± 0.02 in.)
SETTINGS AND ADJUSTMENTS
TXC 250R - 310R 2013 I.E. USA

Shock absorber spring preload adjustment

Proceed as follows:
1. Turn the rear fixing (1) counter clockwise and remove the saddle, unscrew
the retaining screws (2) and remove the right-hand side panel (3).
2. Clean lock ring nut (4) and adjuster ring nut (5) of the spring (6).
3. Either with a hook wrench or an aluminium punch, loosen the lock ring nut.
4. Turn the adjuster ring nut as required.
5. Adjust preload to suit your weight or riding style and tighten the lock ring nut
firmly (tightening torque 50 Nm - 5 Kgm - 67.8 ft/lb).
6. Reassemble the R.H. side panel and the saddle.
5
Be careful not to touch hot exhaust pipe while adjusting the shock
absorber.
4
A
H09082
6
1
2
2
3
5
4
D.25
H09079
H09080
H09081
Workshop Manual Ed. 07-2012