Filter And Drain Plug (250); Blow-By Tube Fitting/Filter (310); Oil Feed Hose Installation - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
4
2
1
H02352
2
1
2
Workshop Manual Ed. 07-2012
ENGINE REASSEMBLY
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Filter and drain plug (250)

250
Fit the oil filter (1) and tighten the cap (2) into place with its gasket using a 12
mm wrench (25 Nm, 2.5 Kgm, 18.44 ft/lb).

Blow-by tube fitting/filter (310)

310
Insert the oil filter (1), screw the hose fitting (2), insert hose (3) and screw clamp (4).
3
H11090

Oil feed hose installation

Refit the hose (1) and tighten the drilled screws (2) with their seals using a 12
mm wrench (8 Nm, 0.8 Kgm, 5.9 ft/lb).
H11356
H.54