TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
1
2
3
3
2
5
Workshop Manual Ed. 07-2012
GENERAL PROCEDURES
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
Voltage regulator removal (TC)
-
Remove the fuel tank as described in the relevant paragraph.
-
Disconnect the connector (1).
-
Loosen the two screws (2) and remove the voltage regulator (3).
H11109
H11110
Coil / Stick-Coil removal
-
With an 8-mm wrench loosen the screws (2), then remove the floater needle
4
(1).
-
Disconnect the connector (3) and remove the coil / Stick-Coil (4).
1
-
During the reassembly, pay attention to the positioning of the gasket (5) with
respect to the plate (1).
H11112
1
H11113
E.20