Makita LC02 Instruction Manual page 9

Removing and installing the sponge filter
1. Sponge filter
011534
To remove the sponge filter, remove the dust bag or dust
pack and then pinch and take it out.
1. Recessed wall
011535
Press in the whole edge of the sponge filter against the
recessed wall inside the dust bag/dust pack mounting
area.
CAUTION:
After cleaning sponge filter, be sure to install it on
•
the cleaner. If washed in water, dry it up before
installing. An insufficiently dried sponge filter may
shorten the service life of the motor.
1
1
9