Cisco C20 TelePresence System Administrator's Manual page 98

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents
Video Layout RemoteLayoutFamily
Select which video layout family to be used for the remote participants.
Requires user role: ADMIN
Value space: <Auto/FullScreen/Equal/PresentationSmallSpeaker/PresentationLargeSpeaker/
Prominent/Overlay/Single>
Auto: The default layout family, as given by the local layout database, will be used as
the remote layout. For more information about the layout database, see the command:
xCommand Video Layout LoadDb.
FullScreen: The FullScreen layout family will be used as the remote layout. It means that
the active speaker or presentation will be shown in full screen. Using this value is not
recommended as from TC6.0.
Equal: The Equal layout family will be used as the remote layout. All videos have equal size,
as long as there is space enough on the screen.
PresentationSmallSpeaker: The PresentationSmallSpeaker layout family will be used as the
remote layout. Using this value is not recommended as from TC6.0.
PresentationLargeSpeaker: The PresentationLargeSpeaker layout family will be used as the
remote layout. Using this value is not recommended as from TC6.0.
Prominent: The Prominent layout family will be used as the remote layout. The active
speaker, or the presentation if present, will be a large picture, while the other participants will
be small pictures. Transitions between active speakers are voice switched.
Overlay: The Overlay layout family will be used as the remote layout. The active speaker, or
the presentation if present, will be shown in full screen, while the other participants will be
small pictures-in-picture (PiP). Transitions between active speakers are voice switched.
Single: The active speaker, or the presentation if present, will be shown in full screen. The
other participants are not shown. Transitions between active speakers are voice switched.
Video Layout RemoteLayoutFamily: Auto
Example:
D14637.10 Profile C20 and Quick Set C20 Administrator Guide TC6.1, APRIL 2013.
Introduction Web interface System settings System settings
Video Monitors
Set the monitor layout mode.
Requires user role: ADMIN
Value space: <Single/Dual/DualPresentationOnly>
Single: The same layout is shown on all monitors.
Dual: All participants in the call is shown on the first monitor, while the presentation (if any)
is shown on the second monitor. Self view can also be displayed on the second monitor,
depending on the Video SelfviewDefault OnMonitorRole setting.
DualPresentationOnly: All participants in the call will be shown on the first monitor, while the
presentation (if any) will be shown on the second monitor.
Video Monitors: Single
Example:
Video OSD Mode
The Video OSD (On Screen Display) Mode lets you define if information and icons should be
displayed on screen.
Requires user role: ADMIN
Value space: <Off/On/Disabled>
Off: Hide the on screen menus, icons and indicators.
On: Display the on screen menus, icons and indicators.
Disabled: When set to disabled, the C20 can use the additional resources usually used by
the GUI to do 1080p30 at the same time as sharing a presentation. The C20 must then be
controlled by a Cisco TelePresence Touch or an external control panel as the GUI will be
disabled.
Video OSD Mode: On
Example:
Video OSD MenuStartupMode
Configures the state of the OSD (On Screen Display) menu after a video system / codec boot.
The setting only applies when the video system is operated by a remote control and the on-
screen menu.
Requires user role: ADMIN
Value space: <Closed/Home>
Closed: The OSD menu will NOT expand automatically. This setting is recommended for 3rd
party integrations that need full control of what is shown on the OSD.
Home: The OSD menu will show the home menu expanded.
Video OSD MenyStartUpMode: Home
Example:
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
98
Administrator Guide
Setting passwords Appendices