Rtp Settings - Cisco C20 TelePresence System Administrator's Manual

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents

RTP settings

RTP Ports Range Start
Specify the first port in the range of RTP ports. Also see the H323 Profile [1..1] PortAllocation
setting.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1024..65502>
Range: Select a value from 1024 to 65502.
RTP Ports Range Start: 2326
Example:
RTP Ports Range Stop
Specify the last RTP port in the range. Also see the H323 Profile [1..1] PortAllocation setting.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1056..65535>
Range: Select a value from 1056 to 65535.
RTP Ports Range Stop: 2486
Example:
D14637.10 Profile C20 and Quick Set C20 Administrator Guide TC6.1, APRIL 2013.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
79
Administrator Guide
Setting passwords Appendices