Makita 12V 8413D Instruction Manual page 5

Specific Safety Rules
1 . Hold tool by insulated gripping surfaces w h e n performing an operation where
the cutting tool may contact hidden wiring. Contact w i t h a "live" wire
will
also make exposed metal parts of the tool "live"
and
shock the operator.
2.
Be aware that this tool is always
in an operating condition, because it does
not have t o be plugged into an electrical outlet.
3.
Always be sure you have a firm footing.
Be sure n o one is below w h e n using the t o o l in high locations.
4. Hold the tool firmly.
5.
Keep hands away from rotating parts.
6. Do
not leave the t o o l running. Operate the t o o l only w h e n hand-held.
7.
Do not touch the drill bit or the workpiece immediately after operation; they
may be extremely h o t and could burn your skin.
SYMBOLS
The
followings show
the
symbols used
for
tool
V
....................................
volts
= -
.................................... direct current
r k
....................................
no load speed
.../
min
..................................
.revolutions
or reciprocation
per minute
b
....................................
number
of blow
5