Configure The Bar Code Slot Reader; Install A Microsd Card - Honeywell Thor CV31 User Manual

Chapter 1 — About the Computer Features

Configure the Bar Code Slot Reader

Install a microSD Card

18
If you installed the bar code slot reader (Model AR3) accessory, you need
to enable and configure it before you can use it.
1 Start Intermec Settings.
2 Tap Data Collection > Tethered Scanner (COM1 or COM3) >
Scanner Settings.
3 Tap Scanner Model.
4 From the list, select ID Tech Slot Scanner.
5 Select Enable Scanner Port.
6 Tap OK.
7 Tap Data Collection > Tethered Scanner (COM1 or COM3) >
Symbologies.
8 Only enable the symbologies that you plan to read.
Use a microSD card to increase file storage or install software. The
computer resets when you install or remove a microSD card.
1 To turn off the computer, press the Power button and tap Suspend.
2 Disconnect the power cord from the computer.
3 Use a Phillips screwdriver to remove the six screws that secure the
cover.
(x6)
Thor CV31 Vehicle-Mount Computer User Manual