Advertisement
9 Crimp a 3/8-inch terminal ring onto the braided ground
10 Connect the 4-pin connector to the power supply.
11 Connect the battery cable to the vehicle battery. For more
How to Connect to the Vehicle Battery
The procedure you use to connect to the vehicle battery
depends on the location of the battery terminal:
•
•
Warning: Verify that the cable to battery connections are
correct. Electrical energy from vehicle batteries can
harm equipment and people.
Connect to the Top Battery Terminal
1 Remove the nuts and bolts from the positive battery
2 Place a 3/8-inch washer onto each end of the battery
Universal Vehicle Power Supply Installation Instructions
wire.
information, see the next section.
Top
Side
terminal.
Negative wire
(green and white)
Ground
wire (black)
Positive
wire (red)
clamp bolt.
Washers
Nut
9
Advertisement
