Cisco Power system Installation Manual page 32

Front and Rear Panel Descriptions
Figure 1-7 Cisco RPS LEDs
AC status LEDs
Table 1-2 LED Descriptions
LED Name Color/State
AC STATUS Off
Amber
Green
DC STATUS
Off
Cisco Redundant Power System Hardware Installation Guide
1-10
Figure 1-7 shows the Cisco RPS front panel LEDs, and
meaning of the colors.
DC STATU S
1
3
DC status LEDs
Description
AC power is not being supplied to the Cisco RPS, or it is switched off.
AC power is being supplied to the Cisco RPS, but the designated
AC-input power module has failed.
The AC-input power module is on and operating correctly.
The DC status LEDs are numbered to correspond to the
Note
DC-output connectors on the Cisco RPS rear panel.
The DC output is powered down at the external device, AC power is not
being supplied to the Cisco RPS, or there is no output cable attached to
the DC output module.
2
4
Chapter 1
Table 1-2 explains the
FAN
TEMP
Fan and temp LEDs
Overview
OL-3654-01