Canceling A Fax Transmission - Sharp MX-C250 Operation Manual

CANCELING A FAX TRANSMISSION

To cancel a transmission that is in progress or a stored transmission job, follow the steps below. A transmission in
progress or a stored transmission job is canceled from the fax status screen. (Printing of a received fax cannot be
canceled.)
To cancel a transmission while the original is being scanned ("Reading" appears in the message display) or
Note
before the key is pressed ([READ-END] key (
[CA] key can be pressed.
Canceling a fax transmission
1
Press the [FAX STATUS] key.
• When a transmission is in progress, the job being transmitted is displayed.
• If the displayed job is not the job that you wish to cancel, it is likely that the job to be canceled is a stored job
waiting for transmission. Press the [BACK] key to display the fax status selection screen and then follow the
procedure in "Canceling a stored transmission job" on "Canceling a stored transmission job" (p.94) to cancel
the job.
When a transmission is not in progress, the following fax status selection screen appears.
Note
2
Press the [C] key.
3
Press the [OK] key.
The transmission is canceled.
• If you do not wish to cancel the transmission, press the [
Note
the [OK] key.
• You can check canceled operations in the Activity Report. "Cancel" will appear in the "Type/Note" column of the
report. Additional information on the display during transmission
(A)
(B)
(C)
(A) Destination name
The name of the destination appears if programmed.
(B) Transmission method name
In the case of a timer transmission, the timer icon "
name.
(C) Number of pages currently transmitted
Appears during sending.
(D) Document number
The document number assigned at the time of scanning in memory transmission mode appears.
) when scanning the original from the document glass), the [C] or
] key in the screen of step 2, select "No", and press
(D)
" appears at the beginning of the transmission method
93
FAX FUNCTIONS