Scanning From Your Computer (Pc Scan); Scanning From A Twain-Compliant Application - Sharp MX-C250 Operation Manual

SCANNING FROM YOUR COMPUTER
(PC SCAN)
The machine supports the TWAIN standard, making it possible to scan from TWAIN-compliant applications.

SCANNING FROM A TWAIN-COMPLIANT APPLICATION

Scanning in PC scan mode is only possible when the scanner driver has been installed from the "Software
CD-ROM" using the integrated installer. For the procedures for installing the scanner driver and configuring settings,
see the Software Setup Guide.
1
Place the original(s) that you wish to scan on the document glass/document feeder.
Press the [SPECIAL FUNCTION] key, and select "PC SCAN".
2
After starting TWAIN-compliant application, click the "File" menu and select a menu
to scan.
The method for accessing the menu to select the scanner depends upon the application.
Note
For more information, refer to the manual or the help file of your application.
3
Select "SHARP MFP TWAIN V", and click the "Select" button.
Note
Depending on your system, "SHARP MFP TWAIN V 1.0 (32-32)" may appear in the above "Select Source" screen.
4
Select the menu to acquire an image from the application's "File" menu.
The scanner driver setup screen will appear.
"Scanner driver settings" (p.137)
5
In the "Scanning Source" menu, select the location where you placed the original in
Step 2.
If you selected "SPF (Duplex-Book)" or "SPF (Duplex-Tablet)" in the "Scanning Source" menu, select whether the
Note
orientation of the placed original is "Right edge is fed first" or "Top edge is fed first".
If you placed a one-sided original in the document feeder, select
"SPF (Simplex)".
Only when using the document feeder (Models with the
two-sided scanning function):
If you placed a two-sided original in the document feeder (Models
with the two-sided scanning function), select "SPF (Duplex-Book)"
or "SPF (Duplex-Tablet)" according to the binding position of the
original.
135
SCANNER FUNCTIONS