CARD SHOT
When copying a card, this function allows you to print the front and back sides of the card next to each other on a
single sheet of paper.
This function creates 2 in 1 images of the front and back side of the card and centers them on the paper.
Original
Front of
card
Back of
card
Select Card Shot with the [
Specify the card size in the Card Shot screen.
Select horizontal (X) or vertical (Y) with the [
[OK] key. Repeat for the other dimension.
• The horizontal and vertical dimensions can each be set to value from 1 to 8-1/2".
Note
• Paper cannot be fed from the bypass tray.
• The card shot function cannot be used in combination with 2 in 1 / 4 in 1 copy, and ID card copy.
• The default settings for the horizontal and vertical dimensions in this screen can be set in "Card Shot
Default" (p.182) in the system settings.
ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust)
The feature is used to strengthen or weaken any one of the three color components R (red), G (green), B (blue).
Select "RGB Adjust" with the [
Select "R (Red)", "G (Green)", or "B (Blue)" with the [
keys, and press the [OK] key.
Copy
][
] keys and press the [OK] key.
][
] keys, specify the dimension with the [
][
] keys and press the [OK] key.
Original
CARD
Front of
card
Back of
card
][
] keys, adjust the shade of the color with the [
35
COPY FUNCTIONS
Copy
CARD
][
] keys, and press the
][
]