Faxing A Two-Sided Original - Sharp MX-C250 Operation Manual

FAXING A TWO-SIDED ORIGINAL

Follow the steps below to automatically transmit both sides of a two-sided original. (Only on models with the
two-sided scanning function.)
1
Press the [DUPLEX] key on the operation panel and select "2-Sided".
2
Select "Portrait-Booklet", "Portrait-Tablet", "Landscape-Booklet", and
"Landscape-Tablet" with the [ ] or [ ] key.
• Booklets and tablets Two-sided originals that are bound at the side are
Note
booklets, and two-sided originals that are bound at the top are tablets.
• Duplex scanning is canceled when the transmission is completed, or when the
[CA] key is pressed.
• Duplex scanning of two-sided originals is only possible when a Document
feeder (Models with the two-sided scanning function) is used. Automatic
scanning of both sides of an original is not possible when the document glass is
used.
• The image of the back side of the original is rotated 180 degrees if needed at
the time of transmission, and thus there is no need to change the orientation at the receiving machine.
• To cancel duplex scanning, select "1-Sided" in step 1 and then press the [OK] key.
• Only the following two-sided document sizes can be used:
"
8-1/2 x 14
3
Press [OK] key.
" " " "
, 8-1/2 x 13-1/2 , 8-1/2 x 13-2/5
" " " "
, 8-1/2 x 13 , 8-1/2 x 11
88
FAX FUNCTIONS
BOOKLET
"
, A4
TABLET