Remote Reception; Distinctive Ring; Tx/Rx End Sound; End Sound Length - Sharp MX-C250 Operation Manual

TX/RX End Sound

This setting is used to select the beep pattern that
signals the end of transmission or reception.
"Pattern 1", "Pattern 2" or "Pattern 3" can be selected.
Before pressing the [OK] key to store your selection, you
can press the key to listen to the selected pattern.

End Sound Length

This setting is used to select the length of the end sound
in seconds. Selections are "2.0 sec", "2.5 sec", "3.0 sec",
"3.5 sec", and "4.0 sec". "3.0 sec" is normally selected.

Distinctive Ring

(Varies depending on country and region)
If multiple telephone numbers have been assigned to
your telephone line, the number called can be
identified by its ringing pattern. By using one number
for voice calls and another number for faxes, you can
tell which type of call you are receiving by the ringing
pattern. You can set your machine to automatically
receive faxes when your fax number is called by
setting the pattern that corresponds to your fax
number. Normally "Off" is selected.

Remote Reception

(Only when an extension phone is connected)
When a call is received on an extension phone
connected to the machine, fax reception can be
activated by entering a 1-digit number and pressing
twice on the phone's keypad. This 1-digit number is
called the remote reception number, and you can set it
to any number from "0" to "9". Normally the remote
reception number is set to "5".
If a remote number has been previously
Note
stored, the newly entered remote number
overwrites the old number.

Disable Fax Print Hold

This setting is used to disable the fax print hold
function,
which holds received faxes in memory instead of
printing them as they are received. (p.97)
Normally the fax print hold function is disabled.
• The setting (which disables fax print hold) is
enabled and a checkmark appears in the checkbox.
• If this procedure is performed when the setting is
enabled, the checkmark will be cleared and the
setting disabled (fax print hold is enabled).
185
SYSTEM SETTINGS