Operating Features - Kenwood TK-372G Service Manual

1. Operation Features
Antenna
Speaker
r r r r r
t t t t t
y y y y y
u u u u u
The transceiver is shown with the optional KNB-14 battery pack.
q q q q q Rotary encoder
Your dealer can program the encoder as either Group
Up/Down (only when the trunking board is installed)
or Channel Up/Down (default setting). Rotate to
select a group or channel. Also rotate to adjust the
squelch in Squelch Adjustment mode.
w w w w w LED indicator
Lights red while transmitting. Lights green while
receiving. Flashes orange while receiving a Code
Squelch or Selective Call code, or a 2-Tone or DTMF
signal that matches the one set up in your transceiver.
Flashes red when the battery power is low while
transmitting.
e e e e e Power switch/ Volume control
Turn clockwise to switch ON the transceiver. Rotate
to adjust the volume. To switch OFF the transceiver,
turn counterclockwise fully.
r r r r r PTT (Push-to-Talk) switch
Press this switch, then speak into the microphone to
call a station.
t t t t t Side 1 key
This is a PF (Programmable Function) key. Press it
to activate its auxiliary function.
y y y y y Side 2 key
This is a PF (Programmable Function) key. Press it
to activate its auxiliary function.
°
• , 2 2 2 2 2 ,3 3 3 3 3 keys
u u u u u
,
These are PF (Programmable Function) keys.
Press each key to activate its auxiliary function.
i i i i i SP/MIC jacks
Connect an optional speaker/ microphone here.

OPERATING FEATURES

w w w w w e e e e e
q q q q q
Microphone
i i i i i
o o o o o
o o o o o Display
Note: The PF keys are programmed with default functions:
• Side 1 key: Lamp
• Side 2 key: Monitor A
°
• key: Scan
•
key: Scan Del/Add
•
• 2 2 2 2 2 key:
Talk Around
• 3 3 3 3 3 key:
RF Power Lo
Programmable Auxiliary Functions
°
• , 2 2 2 2 2 , and 3 3 3 3 3 can be programmed
Side 1, Side 2, ,
with the auxiliary functions listed below.
• Channel Down
• Channel Up
• Display Character
2
• Group Down
2
• Group Up
• Home Channel
• Key Lock
• Lamp
• Monitor A (Monitor Unmute–Momentary)
• Monitor B (Monitor Unmute–Toggle)
• Monitor C (Carrier Squelch–Momentary)
• Monitor D (Carrier Squelch–Toggle)
• None
1
• Operator Sel Tone
• Redial
• RF Power Lo
• Scan
• Scan Del/Add
• Talk-Around
• 2-Tone Encode
• Trunking Group Code Select
1 Available for K market models only.
2 Available only when using Trunking function.
2. Programmable keys
The functions the FPU programs to the function keys are
described in the following sections.
1) Channel up/down
When the key is pressed each time, the channel number to
be selected is incremented/decremented and repeats if held
for one second or longer.
2) Display character
This key switches the LCD display between the group/
channel number and group/channel name.
3) Group up/down
When the key is pressed each time, the group number to
be selected is incremented/decremented and repeats if held
for one second or longer.
TK-372G
2
3