Disassembly For Repair - Kenwood TK-372G Service Manual

Separating the case assembly from the chassis.
z
1. Remove the two knobs
c
2. Remove the two screws
3. Expand the right and left sides of the bottom of the case
assembly, lift the chassis, and remove it from the case
v
assembly .
c
c
v
4. Taking cure not to cut the speaker lead
case assembly, and pull the speaker lead with connector

DISASSEMBLY FOR REPAIR

x
and three round units .
.
x
z
x
z
x
b
, open the chassis and
n
.
b
n
Separating the chassis from the unit.
1. Remove the three screws
Lift the unit (X54), and rise up the connecter lever in the
/
arrow with your finger .
Remove the three hexagonal bosses
m
twelve screws .
2. Remove the solder from the antenna terminal using a
soldering iron, then lift the unit off (X57).
X54-
X57-
TK-372G
.
.
, and remove the
Antenna teminal
X57-
15