Kenwood TK-372G Service Manual page 13

No. Function Choices Display
16 Battery Save ON BATT_ON
OFF BATT_OFF
17 Signaling OR SIG__OR
AND SIG_AND
18 Squelch Level 0-9/1 Step SQL__5
19 Priority None PRI_NONE
Fixed PRI_FIX_
Selected PRI_SEL_
20 Lock Back 0.5-5.0/0.05 LBA_500
Time A
21 Lock Back 0.5-5.0/0.05 LBB_2000 Default:2000ms Cannot
Time B
22 Revert Selected REV_SEL
Channel Last Called REV_L/C_
Last Used REV_L/U_
Selected + Talk Back REV_S/T_
Priority REV_PRI_
Priority + Talk Back REV_P/T_
23 Dropout 0-300/1s DODT___3 Default;3s
Delay Time
24 Dwell Time 0-300/1s DWL___3 Default;3s
DTMF
25 Digit Time 50-200/10ms DIGT__50 Default;50ms
26 Inter Digit Time 50-200/10ms IDT___50
27 First Digit Time 50-200/10ms FDT___50 Default;50ms
28 First Digit Delay 100-1000/50ms RIST_100 Default;100ms
29 Rise Time with QT 100-1000/50ms RTWQ_100 Default;100ms
30 DIAL ID Enable DID_ENA
Disable DID_DIS
31 No.of 12Key NODK_12
DTMF Key 16Key NODK_16
32 DTMF Hold Time ON DHT__ON
OFF DHT__OFF
33 Store and Send Enable SAS_ENA
Disable SAS_DIS
34 D Key D Code DKA_D_CD
Assignment 1-16/1s DKA_16__
35 DTMF Code SQ DTMS_CSQ
Signaling SEL CALL DTMS_SEL
36 Inter Mediaate 0-9,A-D,*,# IMC__#_
Code
37 Group Code A-D,*,# GPCD_FF_ Default;OFF
38 Auto Rest OFF ART_OFF_
Time 1-15/1s ART__10
39 Call Alert/ OFF CA/T_OFF
Transpond Call Alert CA/T_C/A
Transpond CA/T_T/A
(Call Alert)
REALIGNMENT
Remarks
Default
Default
Default;5
Default
Default:500ms Cannot be
set when Priority = none.
be set when Priority = none.
Default
Default;50ms
*1
Default
Default *1
*1
Default *1
*1
Default
Default
Default
Default: # (Can be set only when
DTMF signaling = SEL CALL.)
Default;10s
Default
No. Function Choices Display
Transpond CA/T_T/I
(ID Code)
Transpond CA/T_T/T
(Transpond Code)
Others
40 Panel Test/panel Enable PTM_ENA
Tuning MODE Disable PTM_DIS
*1. This function is not available on TK-372G.
8-4. Memory Reset Mode
This mode is used to clear data for functions that can be set
in Self Programming Mode or to return to reset values (default).
°
Pressing [ ] when "SELF" is shown, sets the display to
"CANCEL".
Turning the encoder alternately switches the display
between "CANCEL" "READY".
°
Pressing [ ] when "READY" is shown, clears the data and
sets the display to "CLEAR".
°
Pressing [ ] again, returns the display to "SELF".
°
Pressing [ ] when "CANCEL" is shown, returns the display
to "SELF" without resetting the data.
When the memory is reset, mode data and model data are
not reset.
TK-372G
Remarks
Default
13