Kenmore 911.93501 Use And Care Manual page 4

I
÷
IMPORTANT S AFETY
INSTRUCTIONS
Ard_l-TIp Bracket (contd.)
Step 2
Anti-tip bracket installation
A. Wood Construction:
1. Roor. Drilla _' pilothoaein
the centerof each pre-.marked
wood floorhole position(a nail
or awl may be used if a drillis
not available),
AND
2. Wall: Drillan angled _" pilot
hole (as shownin Fig. 2) in the
center of each pre-marked
wall hole position (a nailor awl
may be used if a drill is not
available).
A'rrACHMENT TOWALLANDFLOOR
Bracket
I ScrewMunt "_ Plate
__..._j F.==w_ Im T
Rg. 2
B. Mount theANTI-TIP bracket
with the 4 screws provided as
illustrated in Fig. 2,
C. Concrete Construction:
1. Hardware required:
4 each V,' x 11/2' l ag bolt
4 each V£ O.D. sleeve
anchor
2. Drillthe recommendedsize
hole for the anchors intothe
concreteat the center of each
pre-markedconcretefloorand
wall hole position.Installthe
sleeve anchorintothe drilled
holesand then installthe lag
boltsthroughthe bracket.
DO NOT OVERTIGHTENTHE
BOLTS.
Step 3
Checking the installation
A. Complete the installation of
the rangeper the installation
instructions providedwithit.
B. Check if the ANTI.TIP bracket is
installedand engaged properly.
Removethe kick panelor storage
drawerand inspeotthe REAR
LEVEUNG LEG. Make sure it fits
securelyintothe slot.See Fig. 1.
÷
4