NEC NEAX 2000 IVS Command Manual page 101

CM08
COMMAND CODE
08
BASIC SERVICE FEATURE
176 1000-Slot Memory Block Number "2" for Station Speed Di-
aling is used as the Memory Block for System Speed Dialing.
177 Last Number Redial feature for DP/DTMF telephone.
178 Last Number Redial/Stack Dial for internal calls
(effective only when data 177 is set to 0.)
179 Ringing cadence on Direct in Termination call.
180 Ringing cadence on DID call, DISA call and Automated At-
tendant call.
181 Multiline Terminal one-touch calling or DSS key calling
while another party is being rung, or while talking with anoth-
er party.
183 Music selection on the MP card.
185 When the transferring station goes on-hook before the called
station answers for Call Transfer-All Calls service, if the
transferred call remains unanswered for a preprogrammed du-
ration, the transferring station is recalled.
(Recall Timing: CM41 Y = 0, Function No. 07)
187 Recall priority over Call Forwarding
193 Sender Prepause for C.O. outgoing call
(Not used with LCR)
194 Sender Prepause for Tie Line outgoing call
199 For the operation of Line Preselection on a Multiline Termi-
nal, the SPEAKER button is required after depressing the de-
sired LINE/TRUNK button.
200 Wake-up time printout on the H/M printer and the report is
sent to the PMS, when setting a wake-up time from a guest
station.
201 Do Not Disturb records printout on the H/M printer and the
report is sent to the PMS, when setting Do Not Disturb from
a guest station.
CHAPTER 3
Page 78
Revision 2.2
TITLE:
BASIC SERVICE FEATURES
ND-45669 (E)
Addendum-002
JANUARY, 1999
SETTING DATA
0 Available
1 Not available
0 Available (See CM20 - 069)
1 Not available
0 Not available (only available for exter-
nal calls)
1 Available
0 As per CM35 YY = 33
1 0.4s ON - 0.2s OFF -
0.4s ON - 2s OFF
0 0.4s ON - 0.2s OFF -
0.4s ON - 2s OFF
1 As per the data of CM35 YY = 33
0 Not available
1 Available
0 Nocturne
1 Minuet
0 Not available
1 Available
0 Recall is higher
1 Call Forward is higher
0 To provide
1 Not provided
0 Not provided
1 To provide
0 Not required
1 Required
0 Available
1 Not available
0 Available
1 Not available
: Initial Data