Motorola WiNG 5.5 Reference Manual page 702

12 - 20 WiNG 5.5 Access Point System Reference Guide
Protocol
Port
Host
Path/File
User Name
Password
10. When the AP Image Type and appropriate file location and protocol have been specified, select the
load all available images to the
The table now displays available images and their corresponding versions.
11. Select the Upgrade Status
Select the protocol to retrieve the image files. Available options include:
• tftp - Select this option to specify a file location using Trivial File Transfer Protocol.
A port and IP address or hostname are required. A path is optional.
• ftp - Select this option to specify a file location using File Transfer Protocol. A port,
IP address or hostname, username and password are required. A path is optional.
• sftp - Select this option to specify a file location using Secure File Transfer
Protocol. A port, IP address or hostname, username and password are required. A
path is optional.
• http - Select this option to specify a file location using Hypertext Transfer Protocol.
A hostname or IP address is required. Port and path are optional
• cf - Select this option to specify a file location on a Compact Flash card installed
on the device. This option might not be available on all devices.
• usb1/usb2/usb3/usb4 - Select this option to specify the file location on one of the
USB 1, USB 2, USB 3 or USB 4 ports of the device. This option might not be
available on all devices.
Use the spinner control or manually enter the value to define the port used by the
protocol for importing the firmware upgrade file. This option is not valid for local, cf,
usb1, usb2, usb3 and usb4.
Enter IP address or the hostname of the server used to import the firmware file. This
option is not valid for local, cf, usb1, usb2, usb3 and usb4. Use the drop-down to
select the type of host information. Host can be one of Host Name or IP Address.
Specify the path to the firmware file. Enter the complete relative path to the file on
the server.
Define the user name used to access either a FTP or SFTP server.
This field is only available if the selected protocol is ftp or sftp.
Specify the user account password to access the FTP or a SFTP server.
This field is only available if the selected protocol is ftp or sftp.
Type and Version table.
tab to review a list of devices being upgraded by this access point.
Load Image button to